This time, backup was taken the whole HDD まる with the standard backup tool for Windows2000.
Although data was quite fully contained, backup to a mother ship was completed in about 1 hour.
This is recommendation.
It prepares for data return, HDD new in the machine of another desktop is attached before 換装, and a partition is created and formatted by the startup disk of Windows 98.
Format It carries out by format/s and a system is transmitted.
If possible, a required file etc. will be copied, and it is with HIMEM.SYS. It is the best, if a Japanese-related driver is put in and it enables it to also incorporate SMARTDRV.
After and Windows 2000 From CD, I386 directory is copied the whole circle.
Moreover, if required, let's also copy drivers, such as a LAN card.
It checks that new HDD to DOS starts.
First of all, a battery is removed and a screw is removed from a reverse-side side. All of six silver screws except the lid of a memory and a modem are removed.
If a screw is removed, a liquid crystal panel will be opened like the time of using usually.
The next is a difficulty. The cylindrical plastic of the keyboard upper part is removed. Since this has only stopped at TSUME, it is せば O.K. outside PAKIPAKI. (It does not break carefully [ like ].)
A keyboard can be removed now. Since が and two flat cables are connected to the keyboard, please work carefully not to cut this.
If black TSUME on either side is drawn out, a cable will come to escape from a right-hand side connector (probably for keyboards).
If a upside cover is opened, a cable will come to escape from a left-hand side connector (probably for AKYU points).
If a keyboard is removed, a right-hand side adhesion tape will be removed. Moreover, it extracts, without forgetting two connectors shown by the red arrow.
Two silver screws shown by the red arrow are removed. Now, it is fixation of the main part upper part. TSUME accepting it -- next door ます
Four TSUME is removed. Respectively, it is the place (two places) of a liquid crystal hinge between this side of a left alt key, and USB and a modem connector.
If a nail is pinched in between, pushing the main part upper part outside, I will feel that it separated well.
I feel that it will be easy to do if it removes in the order introduced on two lines in order.
Now, decomposition is almost completed. The flat cable which has crawled on the HDD top is removed.
When the connector for AC adapters becomes obstructive, it removes and removes horizontally. (Since it is only HAME てある, it can take easily)
The rest removes and draws out two screws which are fixing HDD.
It warns against turning off a base and a modem cable.
HDD is removed from a griddle and new HDD is attached similarly. The rest will be OKed if it finishes setting up in a procedure contrary to the time of taking into pieces.
It warns against forgetting to put a connector.
If the measures described first are taken and a power supply will be switched on, DOS should start.
It will be the rest if DOS goes up. The setup of Windows2000 can be performed in I386\WINNT.EXE.
At this time, if the Japanese driver is not contained, a screen display will transform itself. (Since it will finish if it is pushing Enter, it OKs)
Moreover, a file copy will become 激遅 if SMARTDRV is not contained. (Since it will finish if it is waiting for several hours, is it O.K.--?)
If Windows2000 is put in, after incorporating minimum drivers, environment is original only by returning backup completely.
