VAIO Laboratory the decomposition method (however -- up to a prohibition seal) of PCG-U1
the decomposition method (however -- up to a prohibition seal) of PCG-U1
the beginning subject of sale -- noisy Although it was VAIO U, it decomposed suddenly (smile).
But although it is to "prohibition seal" this side since it is sealed with the "prohibition seal" by the example and he does not want to be still short of a guarantee, it is large scale someday. 1.8 inches I am pleased if you make it reference when HDD comes out.
* A click of each picture displays a large picture.

Reverse-side side of PCG-U1. If it does not equip with a battery, the bottom is a flat nearly completely.
Although I hope that much [ it is at the battery wearing time and ]. Probably, there is also no method of comrades with the present technology.
For the time being, it is from the extension method of a memory.
The lower hit of PC card slot is a memory slot exactly. A lid is a screw. It has stopped with 1 book, and although it is good, TSUME is caught, and access nature can be removed easily and felt not being. -- if power is applied just for a moment, it will separate perfectly Although it becomes [ whether a lid is damaged and ] anxious apparently, it is OK unexpectedly.
On board [ as standard ] to U1 Into a 128 MB+MicroDIMM extension slot It has composition of 128MB = 256MB.
WinXP It is more comfortable to extend in 256MB, if it could do, since it was quite last-minute. However, it is attached to extension from the beginning. 128MB of memory is removed. You have to put 256MB of extension memory (the amount of the maximum loading of a memory is 128MB+256MB=384MB). Standard Did 128MB have just for a moment, and isn't?
In order to remove a standard memory, white TSUME which has stopped both the sides of a memory is extended.
If TSUME is extended, a memory module will be raised aslant.
Here, if a module is drawn out to the slanting upper part, a memory will separate. This neighborhood Is SO-DIMM etc. a procedure common to the general extension memory for a note?
When finishing removing the memory of preinstallment, the rest is as an extension memory is put.
Although MicroDIMM has come out of many makers, since there are also many products which stated "VAIO correspondence" recently and the guarantee of operation attached, is the direction which chose such products relief?
About an extension memory slot, let's make it this extent, and go into main subject still more.
First of all, it is a screw at the bottom. It carries out 6 books outside and a keyboard is removed.
How to remove a keyboard is recently. As common as a VAIO note. Keyboard lower part TSUME which has stopped 2 parts is removed. Left-hand side TSUME [Ctrl] [Fn] It is hiding the lower hit of a key. If the point is thin and this is pushed in, TSUME will separate.
Similarly, right-hand side TSUME is also removed.
Right-hand side TSUME is []. [->] It is the lower hit of a key.
2 A keyboard can be lifted if TSUME of a part is removed.
Notes 2 . That a keyboard cannot be removed unless it removes a screw at the bottom first, and damaging [ the film cable which will have connected the keyboard if it is made not much forcing when lifting a keyboard ] A They are 2 points. giving -- being also prodigal -- let's work carefully

If it finishes removing even a keyboard, next, a film cable will be removed.

How to remove -> film cable

[Back] [Back to Top Page] email the creator (in Japanese)[brownsugar@vaioethics.com]
Translated from: http://www20.big.or.jp/~brown/vaio/lab/hardware/hard014a.html